GS300,GS400,GS430 Gauge Pod Steering Column Center

$40.00 Buy It Now, Click to see shipping cost, 30-Day Returns, eBay Money Back Guarantee
Seller: print.us2015 ✉️ (359) 100%, Location: West Chicago, Illinois, US, Ships to: US & many other countries, Item: 325598655713 GS300,GS400,GS430 Gauge Pod Steering Column Center.

GS300 98-05 GS400 98-00, GS430 01-05 Gauge Pod Steering Column Center

This 3D printed part goes on the steering column cover. Designed to fit a 52mm or 2 1/16 gauge, the pod is 1.5" deep. The listing is only for the 3D printed part it does not come with the gauge or any interior parts. The gauge pod is pointed straight ahead directly in the driver's peripheral vision. This fits on the top of the steering column and follows the contours of the column cover for a clean look. The design can be put in the center, left center or right center of the column cover.

Drilling into the steering column cover and disabling the auto tilt/telescope steering wheel is required to install this. The pod mount has threaded inserts in the design to mount the hardware. The design comes with a drilling template and hardware to make installation easy. The automatic tilt/telescope will need to be disabled for proper gauge pod clearance it will not work properly without disabling it. If you leave auto tilt/telescope enabled you risk having the gauge pod smashed into the cluster trim if it is not disabled.

This will work on any GS300 98-05, GS400 98-00 or GS430 01-05 it will not work on any other car.

This design will work on the following Lexus part numbers. They are all the same design just different colors. 

452863A110B0 - Gray/Charcoal Steering Column Cover Upper

452863A110C0 - Black Steering Column Cover Upper

452863A110E0 - Sandal Wood/Beige Steering Column Cover Upper

This listing is only for the 3D printed part. It doesn't come with the gauge OR ANY interior trim.

Installation is simple. You remove the steering column cover and drill holes in the steering column cover with the supplied template. The pod is held in place by two bolts that go through the steering column cover into the threaded inserts in the design. Once installed you can't see any of the hardware. The steering column auto tilt and telescope needs to be disabled so the pods don't smash into the cluster trim. Tilt and telescope have their own motors that can be accessed by removing the trim under the steering column. The easiest way to do this is to position the wheel in your preferred spot and disconnect the motors.

I designed this with a 52.5mm hole for the gauge. Not all gauges are 52mm be sure to test fit your gauge DO NOT JUST PRESS IT IN. If you feel heavy resistance inserting the gauge the design will need sanding or you have a gauge larger than 52mm. Gauges are designed to fit snug so you don't have any rattles or noises. Ive found that the lower end gauges are either larger or smaller than 52mm. If your gauge is to loose add a layer of tape until it fits.

Made out of ABS plastic the same material most of the interior plastic is made of. This is a raw 3D printed part you will see small lines from being made. The part can be sanded and painted and you won't see any lines.

If this design does not work for you I have many other designs for the GS chassis.

  • Condition: New
  • Brand: Unbranded
  • Color: Black

PicClick Insights - GS300,GS400,GS430 Gauge Pod Steering Column Center PicClick Exclusive

  •  Popularity - 4 watchers, 0.0 new watchers per day, 362 days for sale on eBay. Very high amount watching. 3 sold, 10 available.
  •  Best Price -
  •  Seller - 359+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive