60A 70A MPPT Solar Panel Regulator Charge Controller Auto 12/24/36/48V Dual US

FEATURE: ❶【Software Update Version】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. ❷Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. ❸Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. ❹Intelligence Fan-on temperature >45℃ and off < 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use. ❺【What You Get】we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.Hope you love it.  

• Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage), floating charge
• Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
• Soft start time ≤1S, Dynamic response and recovery time 100us
• Max efficiency ≥98.1%, PV utilization ≥99%
• In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals
• MULTIPLE ELECTRONIC PROTECTIONS
• Short-circuting
• Reverse-current
• Overcharging
• Overload
• Over-discharging
• Reverse polarity protection

Notes: The output terminal is for lamp only( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.

Remarks: 1. The maximum PV input voltage (Voc): DC160V (The controller can not work with this long duration voltage, which will interrupt the controller. Refer to the input voltage of PV). 2. The output port is only for lamps (12V system less 60W, 24V/36V/48V system less 100W) and will be burned if connected to other loads. The battery output is not reverse polarity protection. 3. Always connect the battery first!!! Make sure the battery voltage is sufficient for the controller to recognize the correct system voltage. The order of dismantling contradicts the order of wiring. 4. Do not connect any inverter/wind/generator or charger to the controller, please connect the inverter to the battery side. 5. Ensures the solar input voltage exceeds 3V or more than the battery voltage and the total input power exceeds the max. , the charging current is almost zero when the controller has trickle charge.

 

You can Put two pieces 60A in parallel ,So total is MPPT 120A. 

  Parameter

Model Name	MPPT-30A	MPPT-40A	MPPT-50A	MPPT-60A
Charging mode	MPPT Maximum power point tracking automatically
Charging	3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge
System type	DC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition	12V system (DC9V-DC15V)
	24V system (DC18V-DC29V)
	36V system (DC30V-DC39V)
	48V system (DC40V~DC60V)
Soft start time	≤1S
Dynamic response and recovery time	≥98.1%  (Voc is 1.5 or 2 times than battery, then it’s best efficiency)
PV utilization	≥99%
Input specification
Voc from PV( Make sure the Voc of PVmeeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. )	12V system (DC20V~DC80V)
	24V system (DC37V~DC105V)
	36V system (DC50V~DC160V)
	48V system (DC72V~DC160V)
The maximum PV input voltage (Voc)	DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)
The maximum PV input power(The total power rated of PV can’t be over this watt that will break the controller.)	12V system  (360W)	12V system (480W)	12V system  (600W)	12V system  (720W)
	24V system (720W)	24V system (960W)	24V system (1200W)	24V system (1440W)
	36V system (1080W)	36V system (1400W)	36V system (1800W)	36V system (2100W)
	48V system (1440W)	48V system (1700W)	48V system (2200W)	48V system (2800W)
Output specification
Selectable battery type(default is Sealed)	Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)
Absorption Charging Voltage	Refer to Batteries charging reference
Floating Charging Voltage	Refer to Batteries charging reference
Overcharging protection voltage	12V system (15V)
	24V system (30V)
	36V system (45V)
	48V system (60V)
Rated output current	30A	40A	50A	60A
Temperature Coefficient	±0.02%/ centi-degree
Automatic temperature compensation	14.2V-(Max temperature-25 centi-degree)*0.3
Output voltage ripple-peak	100mV
Output voltage accurac	≤±1%
Input Anti-intrusion protection	yes
Temperature Protection	75°C
Temperature increased protection	Output power will reduce when it’s more 70 °C Output power will be normal when it’s less 55 °C
Fan-on temperature	>40 °C
Fan-off temperature	<35 °C
Acoustic noise	≤40dB
Cooling way	Forced air cooling
Components	Imported materials, Accord  to EU standards, Industrial grade range.
Environmental requirements	Meet 2002/95/EC; No cadmium, hydrides and fluorides
Security Level	Accord to CE, PSE, FCC, EMC, EN60950
Electromagnetic Compatibility	Accord to EN61000, EN55022, EN55024
Enclosure	IP21
Net weight(Kg)	1.1
Gross weight(Kg)	1.2

 

COPPER COILS True MPPT controller, The Three copper coils play a step-down roles to make your system work more stable.	TRANSFORMER Three Electronic transformer, more safe MULTIPLE ELECTRONIC PROTECTIONS:   Short-circuting Reverse-current Overcharging Overload Over-discharging Reverse polarity protection	FAN COOLING   Good Heat dissipation Intelligence Fan-on temperature >45℃ and off < 40℃ , let your controller feel cooling. Fan use BEARING technologies increase life UP TO 5000hrs in normal use.

   

Tips

1. Always connect the battery first!!! Make sure enough batteries’ voltage let the controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER  connect the solar panel array to the controller without a battery
2. DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller ! connect the Inverter directly to the battery.
3. Ensures solar input voltage is higher than 3V or more than batteries’ voltage and total input power in the range. if the input power is too low for max input power, it may appear to have been discontinued., the charging current almost is zero when the controller is floating charge.
4. Parameter Setting Rules：Floating voltage > Low voltage reconnect > Low voltage discharge.
5. The solar controller will stop output when the battery is under 10.7V. The LCD will be blank when the battery is under 8V and it will re-output when the battery up to 12.6V (adjustable).
6. Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation.
7. When the controller makes a buzzing sound because of It's working hard to dissipate heat for your controller. Rest your heart, it will be stop when the temperature return to normal.
8. Remove all the debris around the controller ( leaving a space of approx. 5.91in ). Make sure all connections going into and from the controller are tight. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.

   

---

Type 2: 60A MPPT Orange  

PowMr Solar Charger Controller MPPT 60A 12V 24V 36V 48V Blacklight LCD Regulator Max PV Input 150VDC Support Lithium batteries

 

The 0-layer Series charge controllers are intelligent controllers suitable for various off-grid solar applications.It protects the battery from being over-charged by the solar modules and over-discharged by the loads. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging. The 0 layer's charging process has been optimized for long battery life and improved system performance.

 

Advantages

• 【Excellent heat dissipation】Die-cast aluminum design ensures good heat dissipation performance, reduces noise, and saves energy; Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
• 【Upgraded 0 Layer Design】0 Layer, easy installation, easy setup; Simply connect the batteries, and the controller will automatically determine the battery voltage. Multifunctional Backlight LCD display for displaying system operation information, customizable parameters, and error codes.
• 【Multiple Battery Adaptation】Automatically detects 12V, 24V, 36V, or 48V DC system voltages, Compatibility with multiple battery types for convenient use: sealed lead-acid, flooded, gel or lithium batteries which must be deep cycle, which is suitable for RVs, Commercial Vehicles, Boats, Yachts, and any off-grid system.
• 【4-Stage Safely Charging】Features 4-stage charging: Bulk Charge, Boost Charge, Float Charge, and Equalization, for a rapid, efficient, safe battery charging, avoid too much gas precipitation or overheating of the battery.
• 【Full System Protection】Customizable charging voltages, Overcharging, over-discharging protection; Meant to safeguard your system, the self-diagnostic capability can assess and protect against PV Array Short Circuit; PV Overcurrent; Load Overload; Load Short Circuit; PV Reverse Polarity; Battery Reverse Polarity; Over-Temperature.

 

 

Feature:

1. Automatically detect 12V/24V/36V/48V DC system voltages; Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%;
2. Deep cycle Sealed, Gel, Flooded and Lithium battery option ready; Electronic protection: Overcharging, over-discharging, overload, and short circuit;
3. Reverse protection: Any combination of solar module and battery, without causing damage to any component;
4. Bulk Charge, Boost Charge, Float Charge, and Equalization 4-stage battery charging algorithm for a rapid, efficient, safe battery charging;
5. The 0-layer MPPT charge controller has a reactivation feature to awaken a sleeping lithium battery. The 0 layer will apply a small charge current to activate the protection circuit and if a correct cell voltage can be reached, it starts a normal charge.    

LCD Display   PV ( Voltage, Current,), viewing parameters, no setting function. BAT (Voltage, Current, battery type), "wL"to Browse Controller parameters. DC(Load mode, turn on/down/time ), Load mode setting, adjust the value. SET(Save, reset), save parameters and reset Controller.	Easy Connection   Mounting hole size : 4 x Ø10mm Max Terminal Size: 16mm2 5AWG Working Temperature -35°C to +45°C Dimension:230x165x72mm(9.1x6.5x2.8inch) Simply connect the batteries, and the controller will automatically determine the battery voltage.	Efficient Heat Sink Excellent heat dissipation characteristic Ensure great airflow. Remove all the debris around the controller (leaving a space of approx 3in)

 Specification:

Technical Specification for Selection Guide
Models	POW-M60-PRO
Charging mode	MPPT Maximum power point tracking automatically
Charging	3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge
System type	DC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition	1 2V system (DC9V-DC15V)
	24V system (DC18V-DC29V)
	36V system (DC30V-DC39V)
	48V system (DC40VDC60V)
Soft start time	<1S
Dynamic response and recovery time	>98.1 % (Voc is 1.5 or 2 times than battery, then it's the best efficiency)
PV utilization	>99%
Input specification
VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it's the best efficiency.)	12V system (DC20VDC80V)
	24V system (DC37V-DC105V)
	36V system (DC50VDC160V)
	48V system (DC72VDC160V)
The maximum PV input voltage (Voc)	DC190V(The controller can't work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.)
The maximum PV input power (The total power rated of PV can't be over this watt that will break the controller.)	12V system (720W)
	24V system (1440W)
	36V system (2100W)
	48V system (2800W)
Output specification
Selectable battery type(default is Sealed)	Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)
Absorption Charging Voltage	Refer to Batteries charging reference
Floating Charging Voltage	Refer to Batteries charging reference
Overcharging protection voltage	12V system (15V)
	24V system (30V)
	36V system (45V)
	48V system (60V)
Rated output current	60A
Temperature Coefficient	±0.02%/ °C
Automatic temperature compensation	14.2V-(Max temperature-25 °C)*0.3
Output voltage ripple-peak	100mv
Output voltage accuracy	<±1%
Input Anti-intrusion protection	yes
Temperature Protection	75°C
Temperature increased protection	Output power will reduce when it's more than 70 °C
	Output power will be normal when it's less than 55 °C
Fan-on temperature	>40 °C
Fan-off temperature	<35 °C
Acoustic noise	<40dB
Cooling way	Forced air cooling
Components	Imported materials, Accord to EU standards, Industrial grade range.
Environmental requirements	Meet 2002/95/EC; No cadmium, hydrides, and fluorides
Security Level	Accord to CE, PSE, FCC, EMC, EN60950
Electromagnetic Compatibility	Accord to EN6W00, EN55022, EN55024
Enclosure	IP21
Net weight(Kg)	1.3
Gross weight(Kg)	1.5

 

 

Package Includes

1 x 60A MPPT Solar Charge Controller

1 x English User Manual

  

 

Mounting information

• The battery must be connected first. NEVER connect the solar panel array to the controller without a battery.
• Ensure input voltage does not exceed 190 VDC to prevent permanent damage.
• Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
• Do NOT connect any inverters or battery chargers into the load terminal of the charge controller.
• Place the controller on a vertical surface protected from direct sunlight, high temperatures, and water. Make sure there is good ventilation.
• Please check for Clearance, and verify that there is sufficient room to run wires, as well as clearance above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).

 

---

Type 3: 40A / 30A / 20A MPPT Orange

      Advantages:

• 12V 24V 20A/ 30A/ 40A mppt Controller w/LCD Display,fit for 12V 24V AGM, Gel, Flooded and Lithium Battery
• Solar Regulator 40a, work with 60W~960W Solar power, Max input 480W100V Solar Power when the battery is 12V, Max input 960W 100V when the battery is 24V.
• Work with Lithium or lead-acid battery charging parameter preset, Advanced MPPT maximum power point tracking technology solar charge controller, tracking efficiency is no less than 99.5%.
• Controller Rated charge current 40A, the charging maximum conversion efficiency can reach 97 %.
• Solar controller 40amp with Excellent heat sink design and Multiple load control modes: 24Hours Working, Light Control, Light+Time Control

 

Feature:

• Advanced MPPT maximum power point tracking technology charge controller with tracking efficiency is no less than 99.5%.
• High-quality components solar charger the maximum conversion efficiency can reach97%.
• Super fast maximum power tracking speed controller while ensuring tracking efficiency.
• Accurate identification and tracking of the maximum power point of the multi-wave peak.
• Reliable maximum input power of PV array to ensure the safety of the equipment.
• 12 24v AUTO voltage identification, wide PV array maximum power point operating voltage range.
• The LCD is designed to display the operation data and working status of the equipment dynamically.
• Various load control modes: general mode, light control mode, dual time mode, pure charger mode, and timing mode.
• Lead-acid and lithium charging processes can be selected.
• Additional customization is required, Use the RS485 methods to maximize the communication needs of different occasions
• dual USB port charging

NOTE: The controller will start the PWM function at the high voltage disconnection (HVD) voltage point, which limits voltage rising to protect the battery.

 

Model	POW-Keeper1220	POW-Keeper1230	POW-Keeper1240
Rated charge current	20A	30A	40A
System rated voltage	12V/24V Auto work
Voltage range of battery	8-32V
Max open voltage of PV module	55V	75V	100V
Battery type	User default, Sealed, Flooded, GEL, LiFePO4
Equalized charging voltage	Maintenance-free lead acid battery 14.6V, GEL: No: Lead acid flooded battery: 14.8V
Absorption charging voltage	Maintenance-fee lead acid battery 14.4V,GEL: 14.2; Lead acid flooded battery: 14.6V
Floating charging voltage	Maintenance-free lead acid battery, GEL, Lead acid flooded battery: 13.8V
Low voltage re-connection (LVR)	Maintenance-free lead acid battery, GEL, Lead acid flooded battery: 12.6V
Low voltage disconnection (LVD)	Maintenance-free lead acid battery, GEL, Lead acid flooded battery: 10.8V
Static loss	<9.2mA 12V; <11.7mA 24V
High voltage disconnection (HVD)	16V (24V x 2)
Duration of absorption charging	2 Hours
Light control voltage	5V
Charge loop voltage drop	<0.29V
LCD Temperature	-20°C~+70°C
Operating Temperature	-20°C-+55°C (To run at full rated current continuously)
Operating Temperature	-20°C-+55°C (To run at full rated current continuously)
Working humidity	<95% No condensation
Protection class	IP30
Dimension (LxWxH) mm	123x178x48	135x202x55	150x220x67

3 modes of load working design:

1. Manual mode: you can turn on/off your LOAD manual.
2. Solar light control Mode: When the PV voltage drop to 5V, the controller is identified as sunset, then turn on the LOAD； Morning PV voltage raise to 5V, and the controller identified as Sunrise will turn off your Load.
3. Solar light+Time Control Mode: Sunset turns on Load, then set a working time, the controller will turn off at a specified time which is set by yourself.

 

PowMr MPPT Controller Newest Design	Controller with Great Heat sink	High-quality components

 

Clear display and Simple wiring to use

• EASY WIRING: Press and push forward the controller's cover first, then insert your battery cable and PV cable,
• Clear display: Use Menu and Set, to view the controller's charging parameter.

 

Solar Controller Wiring tips

1. For Safety, When installing your battery and PV cable to Solar Controller, Please make sure your Breaker is in an Open position, which means the cable has no power going through the cable.
2. After PV and battery cable are installed, Close the Battery's Breaker first, let the controller read your battery first and the Controller will power it on.
3. Then Close the PV breaker and let the PV power enter the controller to charge your battery after the controller displays power on.

  About USDelivery DetailsTerms of salesContact usDelivery WorldwideAbout US       Delivery Details

Our warehouses are located in California, we will ship goods out for you within 24 hours. We offers a variety of shipping methods such as USPS, UPS, FEDEX.

1. Shipment Time: Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number.

2. Shipment Type : The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages.

3. Delivery Time : DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first.

Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.

Terms of sales

1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired.

2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.

3. For all returned products, Please contact us for the returning address and Pls do not open return case.

4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund.  In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.

Contact us 1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours. 2. Feedback is important to us, we will leave positive to our customers.  3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. 4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.  Delivery Worldwide

• Condition: New
• Models: 60A MPPT Sliver
• Brand: PowMr
• Features: LCD Display
• Inverter Technology: Battery-Based
• MAX PV voltage: 190V
• Model: HHJ-60A
• Power Source: Solar
• System Configuration: Off-Grid
• Wattage: 720W-2280W
• Color: Green
• Voltage Input: 12V/24V36V/48V
• Recommended Environment: Indoor/Outdoor
• Protection Properties: Low Voltage Protection, Overcharge Protection, Safety Circuit Protection, Short Circuit Protection
• Current Output: 60A
• Custom Bundle: No
• Type: Charger/Inverter
• Voltage: PV190V
• Charging Mode: MPPT (Maximum Power Point Tracking)
• Current Type: AC
• Application: Home/Garden
• Resistance Properties: Dustproof
• Power: 720W-1880W
• Current Rating: MPPT 60A
• Connector Type: MC4
• Material: Alloy
• Size: 25.40*20.30*7.20cm

See More